Downloads: A new file has been added by bobby123:
newnigma2-stable-lean-dm800-v4.0.9 -ramiMAHER#ssl8
newnigma2-stable-lean-dm800-v4.0.9 -ramiMAHER#ssl8
sim2
enigma2 patched :2014/02/19: by ramiMAHER
################################################## ########## #########
Newnigma2 team proudly presents:
Newnigma2 v4.0.9
################################################## ########## #########
Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.
Important changes:
1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.
2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings
3. install or upgrading:
before installing/upgrading packages, we now check if at least are 3mb free space in flash.
ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
the package. if the min required space is not available than the installation aborts.
!! Attention enigma2 ipk needs at least 9mb !!
4. issue due upgrade to v4.0.9:
if you have troubles by upgrading to v4.0.9 even no 9mb free space for the enigma2 package, so
you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
ignore's now the 9mb needed from the package and uses instead the value you set in
"blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".
4 In case of problems with the update to v4.0.9:
If that does not update to v4.0.9, because the enigma2 package are no 9MB available, is first Newnigma2 installer to update.
After subsequent reboot, you can continue with the upgrade process via gui. In this case, check the free memory is set to the value of the upgrade, the under
"blue button -> NewNigma Services -> System Tools -> Advanced settings -.> min free space" is set.
newnigma2-stable-lean-dm800-v4.0.9 -ramiMAHER#ssl8
newnigma2-stable-lean-dm800-v4.0.9 -ramiMAHER#ssl8
sim2
enigma2 patched :2014/02/19: by ramiMAHER
################################################## ########## #########
Newnigma2 team proudly presents:
Newnigma2 v4.0.9
################################################## ########## #########
Info: since release of e2 v. 3.2 there is no dm7025 support yet. that's what dmm said.
Multiboot: No support for multiboot. Not planned. No need for such a tool.
GP3wizard: No support for gp3wizard. Probably not running. Not needed in Newnigma2 environment.
Important changes:
1. Install picons on USB-Drives:
press menu button -> setup -> system -> storage devices -> then press red button for initialize (be carefully all your data will be erased). last step is to mount the device.
next step: press blue button -> newnigma2 services -> sytsem tools -> expert settings -> change opkg ignore USB/HDD from yes to no. Restart enigma2 und install picons on your usb device.
2. network configuration:
If the IP address assigned manually, as well as the address of the DNS server must be entered.
press menu button -> setup -> system -> network -> adapter settings
3. install or upgrading:
before installing/upgrading packages, we now check if at least are 3mb free space in flash.
ipk's/packages from the newnigma2 team has a value which says the installer the minimum needed space for
the package. if the min required space is not available than the installation aborts.
!! Attention enigma2 ipk needs at least 9mb !!
4. issue due upgrade to v4.0.9:
if you have troubles by upgrading to v4.0.9 even no 9mb free space for the enigma2 package, so
you can first upgrade the newnigma2 installer package. After reboot try to upgrade again via gui, the installer
ignore's now the 9mb needed from the package and uses instead the value you set in
"blue button -> newnigma2 services -> system tools -> expert settings -> min. free space".
4 In case of problems with the update to v4.0.9:
If that does not update to v4.0.9, because the enigma2 package are no 9MB available, is first Newnigma2 installer to update.
After subsequent reboot, you can continue with the upgrade process via gui. In this case, check the free memory is set to the value of the upgrade, the under
"blue button -> NewNigma Services -> System Tools -> Advanced settings -.> min free space" is set.
Last edited by a moderator:
