DM800HD OpenPLi-2.0-beta-dm800-sim201-ssl82 Latest gjstroom builds from source

gsmtech

VIP Member
VIP Member
Joined
May 2, 2007
Messages
3,166
Reaction score
912
- I will edit this first post in the thread with a link to the latest gjstroom builds. So no need to look any further down the thread for the latest release.

NOTE: This Image is for DM800 HD (NON SE) SIM2.01 Clones. I will upload the SE image on a different thread.


Don't use the online update, PLi switched to new drivers !

OpenPLi-2.1-beta-dm800-20120128 by gjstroom

New image with SIM2 SSL84b and original 20111109 drivers.
This image has the first stage bootlogo fixed, previous versions didn't show it.
I made the new OpenWebif the default webinterface, now it has also streaming support !



This image is a 100% build image from OpenPLi source, it uses original 1109 drivers, which runs all plugins without patching.
You can use the update function, but if the PLi team switches to a new driver or ssl you may end up with a non functional box (which is an easy fix).
Check the PLi openembedded shortlog to be sure !
Keep in mind when you do a update, you might need to set the port of openwebif back to port 80 in the plugin menu.



Features:
source: 2012-01-28
drivers: 2011-11-09 original
bootloader: ssl84b
size:42.2 mb



Bootlogo:
standard bootlogo

Plugins:
cccam 2.3.0
OpenWebif

Image flashing:
Be sure you have SSL84 on your box, if you get the "INVALID IMAGE (OR OLD VERSION)" error, flash SSL84 first and try again.
If your box is already at SSL84x you can flash the image immediately, the new SSL84b is included in the image !
Internet Explorer (recommended)
dreamup

Skins:
PLi-HD

Download:
Code:
You don't have permission to view the code content. Log in or register now.
 
Last edited by a moderator:
cheers mate gunna give this a go, well, once i get another 800, lol, gunna get 1 ordered next week, looks a good solid image this, was always dream elite when i had my other 800, but think im gunna change to this!
 
Thanks gsmtech

I will give this a try to see if it helps with the dvi problems

warlord
 
Been using this image for past week and very happy with it, not had any problems. Also added CrossEPG to it and the other half is happy using this for once :)
 
Am i right in assuming this is not to be used on clones and it is better to wait for mfaraj57 - any ideas where he releases
 
Am i right in assuming this is not to be used on clones and it is better to wait for mfaraj57 - any ideas where he releases

No, this is a patched version for use on Dreambox 800HD clones with SIM2.01. As mentioned gjstroom has compiled the image directly from OpenPLI source code so it's a clean up to date image no added rubbish. Then he has patched it for clones, so clone safe latest drivers have been added, latest SIM 2.01 Bootloader SSL82 has been added. CCCAM 2.2.1 is pre-installed, Magic EHD skin and a working VLC player.

This was released over on DreamOEM originally the official support forum for clone SIM2.01 based clones. Do NOT flash this image on Ferarri SIM clones or ESTAR SIM clones. Unless you have verified it is compatible, and modded the bootlaoder to the ones relevant for that particular SIM.
 
how do you till what type of clone you have pls i no its a sim 2.01 not sure if its ssl82 ??
 
how do you till what type of clone you have pls i no its a sim 2.01 not sure if its ssl82 ??

If you have the Tspanel then just go system info / second stage. If you havnt got the Tspanel then you should lol one of the best plugins :D
 
how do you till what type of clone you have pls i no its a sim 2.01 not sure if its ssl82 ??

If your Sure it's SIM2.01 (not the older SIM2), The gold sticker under the box should verify this, also as Ja5 mentioned check the second stage version from TS Panel. Once you've verified it is definfitely SIM2.01 then it doesnt matter which bootloader you have by flashing this image it will also update your bootloader to the latest one SSL 82.
 
ok so ive had a look and not got it on so were do i get TS Panel what version and how to install it bye usb if i hav to download of the net
 
i always thought that you can flash through web interface only on genuine boxes, am I wrong ?
got the dm800hd pro sim2.01 bootloader82 - will this work fine ?

Yes it will work fine.. Flashing thorugh the web browser is the recommended method for both Original and Clones works fine. The caveat here is before flashing you need to make sure

- Your box has the correct SIM card for the inmage your flashing and the bootlaoder is compatible.

In your case you can directly flash this image via web browser with no problem...you have SIM2.01 and SSL82. One IMPORTANT thing to check BEFORE you flash is after you have downloaded the image verify that the MD5 checksum matches.

i.e: Note in the the 1st post the MD5 checksum is listed...get a free MD5 checking programme such as winmd5 and calculate the checksum on the downlaoded file, if it;s same as the checksum in the 1st post of this thread...then in maean the download is good...and the image hasnt been corrupted during download...So your safe to flash via Browser.

DO NOT...flash the image if the MD5 checksums do not match..this means you have a corrupt download...Try redownlaoding the file again. If you flash a corrupt image worst case scenario..you will have to use DreamUP to recover it.
 
I have downloaded 6 versions of this file and everytime the checksum md5 says that they dont match is there any were else I can get this from !!
 
There is a new compile available now from july 1st open pli source code, I will upload it later.
 
Back
Top