Cloud Ibox 3 ....Many problems!!!!!

smart56

Inactive User
Joined
Aug 12, 2012
Messages
193
Reaction score
37
Location
Italy
Hi friends,
I just received from L&W the new Cloud Ibox3 with last bootloader but the box has the following problems:
1. It doesn't recognize the DVB-T/C tuner (setup tuner menu shows only DVB-S2 ) Ialso opened the box and the tuner is correctly put in the connector of board. I tried many images with same result.
2. Now in the box is installed the OpenPLi and I cant flash other images. When I put the usb stick with different image and swtich off/on the box doesnt update the image (start always OpenPLi!!!)
3. I can connect the box to network only by WiFi becouse LAN doesnt work fine
Have you some suggestion?
Thanks in advance
 
Before flashed with success many images with cloudix. The box has last bootloader
 
Ok mate so cloudix is is then.

Inside the folder of the image your trying to flash is there i file called noforce ?

If there is change it to force and try again.
 
Thk .....In all folder there is already a file colled force
 
I already tried 3 different pen drive FAT32 formatted. Before I flashed all images with a Kingston 1 GB and it worked fine
 
I just tried with xspeed but the the falsh doesnt start and in this doesnt start the image also
 
thanks for your support!
Image info:
Hardware: ini-1000de (20140307)
Openpli 4
Kernel: 3.6.0
Enigma:2014-06-07
last update: 2014-07-24
Tuner detected: Tuner A DVB-S2 Internal


The image works fine (only Sat) but I can't change image and the box dosent detect the DVB-T tuner
 
thanks for your support!
Image info:
Hardware: ini-1000de (20140307)
Openpli 4
Kernel: 3.6.0
Enigma:2014-06-07
last update: 2014-07-24
Tuner detected: Tuner A DVB-S2 Internal


The image works fine (only Sat) but I can't change image and the box dosent detect the DVB-T tuner

Well from those stats you must be on the new bootloader as you say. Sorry mate im at a loss as to why these images wont flash as you have tried other sticks formatted them.
 
Do you think that online update of image can be solve the problem?
Are there some risk to update OpenPLi online?
Thk
 
Do you think that online update of image can be solve the problem?
Are there some risk to update OpenPLi online?
Thk

Not sure mate becuase a lot of the images are not officially supported there adapted for the ibox 3 so updating could cause more problems than it solves.
 
Hi mate . I have flashed a load of the cloud ibox2 plus boxes for my family . for some reason the last two boxes have the openpli image on .
for the life of me i can't flash them . tried different pens no luck . when i telnet the box it says its the icloud 3 box and it has the new bootloader . so its the cloudix file.
Does anyone know another way to flash a new image not using a usb pen.
 
Hi mate . I have flashed a load of the cloud ibox2 plus boxes for my family . for some reason the last two boxes have the openpli image on .
for the life of me i can't flash them . tried different pens no luck . when i telnet the box it says its the icloud 3 box and it has the new bootloader . so its the cloudix file.
Does anyone know another way to flash a new image not using a usb pen.

I had same problem as you but with cloud ibox II+ tried loads of usb flash drives but would not flash..finally i used a 4gb one i dug out the draw and it flashed first time..
Also check firmware folder and see if there is a file named "nforce",if yes rename file to just "force"

seems you have identical problem to OP..they sent box back i believe..

I just received from L&W the new Cloud Ibox3 with last bootloader but the box has the following problems:
1. It doesn't recognize the DVB-T/C tuner (setup tuner menu shows only DVB-S2 ) Ialso opened the box and the tuner is correctly put in the connector of board. I tried many images with same result.
2. Now in the box is installed the OpenPLi and I cant flash other images. When I put the usb stick with different image and swtich off/on the box doesnt update the image (start always OpenPLi!!!)
 
Hi,
Yesterday I received a new cloud ibox 3 with OpePLi installed. This box works fine but i cant flash any new imge!!!!
 
Thanks for the reply AJT . The boxes i have are cloud ibox 2 plus boxes. But telnet says its an ibox 3 . It must be openpli ibox 3 image thats on it.
I have used the same usb stick for a number of these boxes with no problems. Can you flash it using an ftp program and putting the image in the temp folder .then flash using the remote. using the software manager?
 
Back
Top