Nissan micra stereo unlock code.

Rs2k_Rider

DW's Resident Medic
Joined
Nov 21, 2006
Messages
4,523
Reaction score
355
Location
essex
Hi all
Just fixed mates care and need code for stereo.

All it's got on it is

BP5365 5 6446755

7 645 365 318

6uvypa9e.jpg


Ty
 
Last edited:
Anyone :) she's off to uni 150 miles away Saturday so need to sort it for her.

I tried a few calcs but can't work out what to use between serial and model.
 
just got your code of someone here you go mate

3008

Ty pal :) it's on lockout again lol !!

Is this right ...

Key 1 ... Press 3 times (till 3 shows)
Key 2 ... Press once
Key 3 ... Press once
Key 4 ... Press 8 times (till 8 shows)

Then press TA ? To enter code ?
 
Ty pal :) it's on lockout again lol !!

Is this right ...

Key 1 ... Press 3 times (till 3 shows)
Key 2 ... Press once
Key 3 ... Press once
Key 4 ... Press 8 times (till 8 shows)

Then press TA ? To enter code ?

Seems to be the consensus alright,apart from the end bit

"either press volume up or tune station up or press and hold the TA button, display will show CODE OK"
 
Seems to be the consensus alright,apart from the end bit

"either press volume up or tune station up or press and hold the TA button, display will show CODE OK"

So hit the tune ^ then TA ?
 
Okay pal give em a go lol :) still locked out for hour. She's taking it for a car wash and Hoover lol
 
Okay pal give em a go lol :) still locked out for hour. She's taking it for a car wash and Hoover lol

AFAIK you need to keep the engine running for the hour or two it takes to disengage from lockout lol
 
AFAIK you need to keep the engine running for the hour or two it takes to disengage from lockout lol

Yeah it's daft. Surely should just be an hour regardless. In practice it takes about 3 lol
 
Yeah it's daft. Surely should just be an hour regardless. In practice it takes about 3 lol

You have to wait 1-2 hours until it asks the code is 0000 and after putting the code as follows

Code Entry Instructions
Turn on the radio, the display will show 'CODE' followed by '0000'

Press preset [ 1 ] repeatedly for the first digit
Press preset [ 2 ] repeatedly for the second digit
Press preset [ 3 ] repeatedly for the third digit
Press preset [ 4 ] repeatedly for the fourth digit

Finally press the [ ^ ] to enter the code. The set will display 'CODE' briefly and switch on
 
Worked a treat :) ty

Put fm on an ....... Static lol

Meh !! Pulled radio back out, which isn't as easy as you would think being a micra.
Aerial plugged in still ... Pull off radio, and the centre pin was gone. So had to solder on a bit of copper wire in its place lol

Working a treat now.
 
Back
Top