Thread: 07 (new shape) L200 fault codes


Forum: Cars and Vans

Can anyone help with identifying what fault codes refer to on above please?

Results 1 to 7 of 7
  1. #1
    DW Senior Member willin's Avatar
    Join Date
    Sep 2007
    Posts
    368
    DW Cash
    30
    Post Thanks / Like
    Downloads
    3
    Uploads
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    07 (new shape) L200 fault codes

    Can anyone help with identifying what fault codes refer to on above please?



  2. #2
    VIP Member miggy's Avatar
    Join Date
    Mar 2010
    Location
    Etihad Stadium
    Posts
    6,438
    DW Cash
    897
    Trophies
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Mentioned
    101 Post(s)
    Tagged
    3 Thread(s)

    Re: 07 (new shape) L200 fault codes

    Have a look at these mate

    Below are the trouble codes for the L200 up to the new common rail engine after that it all changes.
    Your code 52 realtes to the vacuum line to the turbo VGT actuator, this is normally a split hose but you might have a defective solenoid,

    INSPECTION TROUBLE CODES

    Code No Diagnosis item
    11 Accelerator pedal position sensor
    12* Boost pressure sensor system
    13 Barometric pressure sensor (ECU Built in) system
    14 Fuel tempreture sensor
    15 Engine coolant tempreture sensor
    16 Boost air tempreture sensor
    17 Vehicle speed sensor system
    18 Pump speed sensor system
    21 Crank angle sensor system
    23 Idle switch (accelerator pedal position sensor built in )
    25* Timer piston position sensor system
    26* Control sleeve position sensor system
    27 Accelerator pedal position sensor (sub) system
    41* Main throttle solenoid valve system
    43 Timing control valve system
    46 Injection correction ROM system
    48* GE actuator (in the middle of control sleeve position sensor inoperative) system
    49* Over boost (variable geometry control pressure system malfunction) <4WD>
    51 EGR valve position sensor system
    52 Variable geometry control pressure system
    54 Immobilizer system

    If the above-mentioned diagnosis codes code number with the asterisk can be displayed along with another code number in the parentheses simultaneously check the other code number before replacing the ECU (Thats what the service info says!)

    12 (41, 49), 26 (48), 25 (43), 41 (12, 49), 48 (26), 49 (12, 41)


    ABS Brake system

    11 Front right wheel speed sensor
    12 Front left wheel speed sensor
    13 Rear right wheel speed sensor
    14 Rear left wheel speed sensor 11-14 Open or short circuit
    15 Wheel speed sensor Abnormal output signal
    16 Power supply system
    21 Front right wheel speed sensor
    22 Front left wheel speed sensor
    23 Rear right wheel speed sensor
    24 Rear left wheel speed sensor 21-24 Abnormal
    25 Free wheel engage switch
    26 4WD position detection switch
    27 Rear differential lock detection switch
    32 G Sensor detection system
    33 Stop lamp switch system
    41 Front right solenoid valve
    42 Front left solenoid valve
    43 Rear solenoid valve
    51 Valve driver
    53 Motor driver
    63 ABS ECU

  3. #3
    DW Senior Member willin's Avatar
    Join Date
    Sep 2007
    Posts
    368
    DW Cash
    30
    Post Thanks / Like
    Downloads
    3
    Uploads
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Re: 07 (new shape) L200 fault codes

    After a lot of googling I've found them! P0106 = manifold absolute pressure/barometric pressure circuit range/ performance problem. U1102 maf sensor (same thing as the manifold absolute pressure afaik) in range but lower than expected. the fault reader is also showing barometric pressure as 0 and the air temp as -40 (thats minus) also the coolant temp a little low this does rise as you rev the engine, so I'm assuming the maf sensor is faulty as I'v had that p0106 fault twice before, the map sensor s not cheap could someone confirm the above is correct before I buy one.

  4. #4
    VIP Member miggy's Avatar
    Join Date
    Mar 2010
    Location
    Etihad Stadium
    Posts
    6,438
    DW Cash
    897
    Trophies
    Post Thanks / Like
    Downloads
    0
    Uploads
    0
    Mentioned
    101 Post(s)
    Tagged
    3 Thread(s)

    Re: 07 (new shape) L200 fault codes

    Sounds like you are sorted there mate, but before you jump in see if any of our other members can confirm first good luck

  5. #5
    DW Senior Member willin's Avatar
    Join Date
    Sep 2007
    Posts
    368
    DW Cash
    30
    Post Thanks / Like
    Downloads
    3
    Uploads
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Re: 07 (new shape) L200 fault codes

    Thanks miggy, has anyone any advice/thoughts on post 3?

  6. #6
    VIP Member
    Join Date
    Nov 2005
    Location
    uk
    Posts
    3,819
    DW Cash
    85
    Post Thanks / Like
    Downloads
    5
    Uploads
    0
    Mentioned
    10 Post(s)
    Tagged
    0 Thread(s)

    Re: 07 (new shape) L200 fault codes

    going by the fault code it looks like maf

    disconect it and see what reading / faultcode

    if u know some 1 with same car borrow their maf to confirm
    Always Learning new stuff

  7. #7
    DW Senior Member willin's Avatar
    Join Date
    Sep 2007
    Posts
    368
    DW Cash
    30
    Post Thanks / Like
    Downloads
    3
    Uploads
    0
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Re: 07 (new shape) L200 fault codes

    Quote Originally Posted by willin View Post
    After a lot of googling I've found them! P0106 = manifold absolute pressure/barometric pressure circuit range/ performance problem. U1102 maf sensor (same thing as the manifold absolute pressure afaik) in range but lower than expected. the fault reader is also showing barometric pressure as 0 and the air temp as -40 (thats minus) also the coolant temp a little low this does rise as you rev the engine, so I'm assuming the maf sensor is faulty as I'v had that p0106 fault twice before, the map sensor s not cheap could someone confirm the above is correct before I buy one.
    An update on the above which may help someone, rang the local mitsubishi dealer for a price on the MAF sensor 255.79 talk about main dealer rip-off. Mitsubishi L200 Air Flow Meter / Sensor or Mitsubishi L200 DI-D 2.5DT 2006-> NEW AIR MASS SENSOR FLOW METER * OE QUALITY * | eBay
    Went on ebay searched for L200 salvage as you can look at the pics to see if it is the correct motor, after a bit of haggling with a salvage yard got one for 25 delivered (don't tell them what they cost new). ran much better but when accelerating would go great then slow as, got the management light on again a few times (same codes as before) although this did reset after a short while. took it to a mates garage they checked the engine control boost pipe (opposite side to the air filter)when disconnected it was not even blowing air. Unblocked the inlet into the cylinders with a piece of wire revved it a few times and it unblocked , runs really well atm, worth checking before buying sensors etc.



User Tag List

Tags for this Thread

View Tag Cloud

Important Keywords:

absolute, bet, blocked, buy, cheap, codes, coolant, ebay, engine, filter, free, fuel, google, lower, management, motor, piston, power, price, problem, quality, slow, system, timer, update, fault, refer, identifying, shape, l200

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •