got me self a Vibe 800w bass bin with amp for the boot and i have an oldish pioneer which seems that it will do the cause, as it's got all the correct out puts etc for remote and audio etc, grabbed me self a kit from halfords for installation, which has the following,
VIBE SLICK 8 AWG Wiring KitThe ALL NEW SLICK wiring kits match value and performance. Available in 8 AWG and high power 4 AWG packs, these kits provide everything you need to get up and running with your new VIBE amplifier.
■5m 8AWG power cable
■1m 8AWG ground cable
■5m RCA interconnect
■5m remote turn on wire
■2 x 5m 16AWG speaker cable
■AGU fuseholder
■60 amp AGU fuse
■2 x spade terminals
■6 pcs cable ties
1500 watt
would this be ok for a vectra? like the length of wiring i mean? also was looking at ISO leads to make the display work but then again i'm not sure you can run my car stero with the orginal dashboard as all the stuff will be displayed on the new stereo leaving the date on the dash which i guess isn't the end of the world.
ta.
my local garage said they'd install it even though it looks easy enough to do (but it's not the weather for me!) what kinda cost is acceptable for this kind of work...
VIBE SLICK 8 AWG Wiring KitThe ALL NEW SLICK wiring kits match value and performance. Available in 8 AWG and high power 4 AWG packs, these kits provide everything you need to get up and running with your new VIBE amplifier.
■5m 8AWG power cable
■1m 8AWG ground cable
■5m RCA interconnect
■5m remote turn on wire
■2 x 5m 16AWG speaker cable
■AGU fuseholder
■60 amp AGU fuse
■2 x spade terminals
■6 pcs cable ties
1500 watt
would this be ok for a vectra? like the length of wiring i mean? also was looking at ISO leads to make the display work but then again i'm not sure you can run my car stero with the orginal dashboard as all the stuff will be displayed on the new stereo leaving the date on the dash which i guess isn't the end of the world.
ta.
my local garage said they'd install it even though it looks easy enough to do (but it's not the weather for me!) what kinda cost is acceptable for this kind of work...
Last edited:
