commando 14.6 to oscam only help

Im having a right mer gave up trying oscam on darkstar2 image couldnt get it to work on oscam only
im using pli at moment on dm500 as server
ive got it going on oscam but all my cccam stuff is still in there everytime i delete it i lose everything

i would like to goto commando 14.6 oscam only
ive downloaded oscam-svn6642-powerpc-tuxbox-old-webif-Distribution.tar.gz hope this is the right one

i all so have a vuduo which i watch tv on in the house
my vu was updating the card before when on cccam not sure if it is now though
a tm500 which my daughter has in her bedroom
my brother and sister have dm500s which are using cccam
i would like to keep the sever dm500 as a viewing box aswell just seems to go blank when i try something

would someone mind looking at my cccam.cfg - oscam.conf - oscam.server - oscam.user files to see where im going wrong im nearly there but something not quite right ive read and read and been at this 3 days now everytime i look at peoples configs theres something different in them

cccam.cfg i thought i could get rid when on oscam only but not sure where n line goes to link family on cccam

also is there a script or plugin i can use to put box into standy after restart that the reason i wanted darkstar2 as this worked great


cheers lee


ccc.cfg

SERVER LISTEN PORT : 1111
WEBINFO USERNAME : 2222
WEBINFO PASSWORD : 3333
WEBINFO LISTEN PORT : 17001
ZAP OSD TIME : 3
OSD USERNAME : root
OSD PASSWORD : dreamboy
OSD PORT : 80
SHOW TIMING : yes
MINI OSD : yes
DEBUG : yes
NEWCAMD CONF : yes
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
MINIMUM CLIENT VERSION : 1.7.0
ALLOW WEBINFO : yes

BOXKEY: /dev/sci0 44 44 44 44 <-- my box key



PIN: /dev/sci0 5555 <-- my pin

N: 127.0.0.1 17002 AAAAA BBBBBBBBBB 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256


#my vuduo
F: vuduo boxvuduo 0 0 1 { 0:0:1 }


#leah dauhter
#F: user password 0 0 0 { 0:0:1 } { } { 07:00-23:59 }



#tyler brother
F: user password 0 0 0 { 0:0:1 }



#sharon sister
F: user password 0 0 0 { 0:0:1 }



oscam.conf

[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1

[webif]
httpport = 8888
httpuser = DDDD <--- login
httppwd = EEEEE <--- password
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
# protocols

[newcamd]
key = 0102030405060708091011121314
port = 17002@0963:000000

[cccam]
port = 3333 <---- my cccam port
reshare = 0


oscam.server

[reader]
label = cardslot
enable = 1
protocol = internal
device = /dev/sci0
caid = 0963:000000
detect = cd
ident = 0963:000000
group = 1
emmcache = 1,3,2
ecmcache = 1
blockemm-g = 1
blockemm-unknown = 1
lb_weight = 101


oscam.user

[account]
user = AAAAA
description = for local mgcamd or DVBAPI
pwd = BBBBBBBBBB
disabled = 0
uniq = 1
group = 1
au = cardslot
caid = 0963:000000


#my vuduo
[account]
user = myvuduo
pwd = password
group = 1,2
uniq = 1
caid = 0963
ident = 0963:000000
description = for local mgcamd or DVBAPI
disabled = 0
au = 1

#leah
[account]
user = leah
pwd = password
group = 1,2
uniq = 1
caid = 0963
ident = 0963:000000
description = for local mgcamd or DVBAPI
disabled = 0
au = 0

#sharon
[account]
user = sharon
pwd = password
group = 1,2
uniq = 1
caid = 0963
ident = 0963:000000
description = for local mgcamd or DVBAPI
disabled = 0
au = 0

#tyler
[account]
user = tyler
pwd = password
group = 1,2
uniq = 1
caid = 0963
ident = 0963:000000
description = for local mgcamd or DVBAPI
disabled = 0
au = 0

ive installed fresh commando 14.6
added oscam-svn6642-powerpc-tuxbox-old-webif-Distribution.tar.gz - in var/bin/emu
swiched on in panel now showing running
ive had to manually put 3 configs in place var/tuxbox/configs
im not even clearing my card in box
bit of a daft question being a fresh install do i have to install camd or anything else

lee3273 said:

ive installed fresh commando 14.6
added oscam-svn6642-powerpc-tuxbox-old-webif-Distribution.tar.gz - in var/bin/emu
swiched on in panel now showing running
ive had to manually put 3 configs in place var/tuxbox/configs
im not even clearing my card in box
bit of a daft question being a fresh install do i have to install camd or anything else

Click to expand...

Did you extract the oscam bin file from the .tar.gz?

You will need to enable dvbapi in your oscam.conf,and put a dvbapi account in oscam.user if you want to be able to view on the server box

Hello mate, have a look here at post #17 https://www.digitalworldz.co.uk/index.php?threads/292054/
This gives a guide how to set up a dm500 as a server using oscam, the only thing not included is how to install oscam in the right directory but I'm sure others will give you some advice on that.
You can use the timer function on commando to schedule the box to go into standby.

wiz569 said:

,and put a dvbapi account in oscam.user if you want to be able to view on the server box

Click to expand...

I have oscam running only on a Vu+ Duo (server) and don't have a specific dvbapi account in oscam.user and I can view channels fine....

I'm still new to all this and sure there's a reason why a dvbapi account in oscam.user is needed.

JEDI0 said:

I have oscam running only on a Vu+ Duo (server) and don't have a specific dvbapi account in oscam.user and I can view channels fine....

I'm still new to all this and sure there's a reason why a dvbapi account in oscam.user is needed.

Click to expand...

You can view channels on your server box without a dvbapi account?

Maybe you only need to enable it in oscam.conf so,

I'm very new to oscam myself so might get some things wrong

Sent from my X10i using Tapatalk 2

Im using s dm800se with digitalworldz image as a server, I've disabled dvbapi through webif and I can still view channels.

Here's my configs, the only changes are the x's to hide private info.

oscam config

[global]
nice = -1
logfile = /dev/null
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1

[dvbapi]
enabled = 1
#user = linuxsatsupport
boxtype = dreambox
au = 1
pmt_mode = 0

[cccam]
port = xxxxx
version = 2.1.3
build = 3165
reshare = 0

[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 5
httphideidleclients = 0
httpallowed = 192.168.0.0 - 255.255.255.255
debug = 255

[monitor]
appendchaninfo = 1
----------------------
oscam server

[reader]
label = 1
protocol = internal
detect = cd
device = /dev/sci0
caid = 0963
ident = 0963:000000
EMMCache = 1,1,0
group = 1
ecmwhitelist =


[reader]
label = remote
protocol = cccam
#device = peers.dyndns.org,12000
#account = user,pass
group = 1
#caid = 09c4
#ident = 09c4:000000
cccversion = 2.1.4
reconnecttimeout = 5
-------------------------
oscam user

[account]
user = xxxxx
pwd = xxxxx
group = 1,2
uniq = 1
caid = 0963
ident = 0963:000000
au = 1

[account]
user = xxxxx
pwd = xxxxx
group = 1,2
uniq = 1
caid = 0963
ident = 0963:000000
au = 1

[account]
user = xxxxx
pwd = xxxxx
group = 1,2
uniq = 1
caid = 0963
ident = 0963:000000
au = 1

I'm wondering if dvbapi is actually still operating even though I'v disabled it in webif?
Everything seems to be running ok although I'm not sure about updating entitlements with this set up yet.

You havent disabled it m8

You have it set to
[dvbapi]
enabled = 1

Its just the username you have commented out,so its probably still running

wiz569 said:

You havent disabled it m8

You have it set to
[dvbapi]
enabled = 1


Its just the username you have commented out,so its probably still running

Click to expand...

Ta mate,
I thought so, if I want to disable it do I just put a # in front of enabled = 1?
What does dvbapi actually do? I understand Oscam reads and shares the card, cccam protocol enabled lets Oscam work with cccam? Where does dvbapi fit in?

beechtree said:

oscam server

[reader]
label = 1
protocol = internal
detect = cd
device = /dev/sci0
caid = 0963
ident = 0963:000000
EMMCache = 1,1,0
group = 1
ecmwhitelist =

[reader]
label = remote
protocol = cccam
#device = peers.dyndns.org,12000
#account = user,pass
group = 1
#caid = 09c4
#ident = 09c4:000000
cccversion = 2.1.4
reconnecttimeout = 5

Click to expand...

Mine config is identical to yours but why have you got 2 readers in oscam server? see mine below.


I thought you would only need 2 readers if you were using both card slots e.g.

group = 1
device = /dev/sci0

group = 2
device = /dev/sci1

Then in oscam user you can select which client has access to each card
group = 1 (slot 1)
group = 2 (slot 2)
group = 1,2 (slot 1 & 2)

beechtree said:

oscam user

[account]
user = xxxxx
pwd = xxxxx
group = 1,2
uniq = 1
caid = 0963
ident = 0963:000000
au = 1

[account]
user = xxxxx
pwd = xxxxx
group = 1,2
uniq = 1
caid = 0963
ident = 0963:000000
au = 1

Click to expand...

group = 1,2 (You have set your friends/family to share card slot 1 and 2)
au = 1 (all your clients are set to send you EMM)

see mine below


In dvbapi I have au = 1 so I can update entitlements (EMM) myself as server is connected to dish

Don't know why I have 2 readers in oscam server mate, I downloaded Oscam from TSPanel and it came with pre set configs, I didn't change anything at all in Oscam Server. I'm only using 1 card so I think it'll be ok.
The au = setting has me a tad confused, if I leave it blank like yours does that mean I update entitlements through my server(it is connected to a dish). My clients are also connected to their own dish but they don't have a card, I'd like to understand this a bit better.

Gonna have a crack at this tommorrow off to work now
in your oscam user config accounts i see you have all yours set to au = 1
i thought you only need 1 of them to au i was hoping my vudu would do this
also do i need the whitelist

check back tomorrow mate, investigations continue....

In my Oscam user config all my users are set as au =
In dvbapi I have au = 1 so I can update entitlements (EMM) myself as server is connected to dish

Found the below if it helps
AU settings:

au = [label of reader] # sending EMMs to specified reader (security issue: clients can see SC data!)
au = 1 # auto AU is sending EMMs to all readers (security issue: clients can see SC data!)

Click to expand...

Default:

au = [blank] # none

Click to expand...

Ta mate, I'll make some changes tomorrow.

JEDI0 said:

Mine config is identical to yours but why have you got 2 readers in oscam server

Click to expand...

The second and any subsequent readers are outside shares

Sent from my X10i using Tapatalk 2

beechtree said:

Ta mate,
I thought so, if I want to disable it do I just put a # in front of enabled = 1?
What does dvbapi actually do? I understand Oscam reads and shares the card, cccam protocol enabled lets Oscam work with cccam? Where does dvbapi fit in?

Click to expand...

Just the 1 to a zero

But you won't be able to view on that box then,I tested it on mine


Sent from my X10i using Tapatalk 2

beechtree said:

I've disabled dvbapi through webif and I can still view channels.

Click to expand...

If changes are made in webif you must restart oscam.

Like wiz I tried it this morning and could not view channels on server. So a dvbapi account is not requited in oscam user but dvbapi must be enabled

Thanks guys.
Let's see if I can get the au setting straight in my head.
au stands for auto update which keeps my card alive by receiving entitlements through EMM's. If I want my server with my card to receive EMM and update entitlements I set au = 1 in Dvbapi. If I wanted to receive EMM through my clients I should set au = 1 in the chosen account in Oscam User. If I don't want to receive EMM from clients I set all accounts to au = 0 or leave it blank?
At the minute I have both dvbapi and user accounts set to au = 1, I'm not sure if this set up has actually updated entitlements because they are currently valid for another couple of months. I'll probably change the user accounts to au = 0.
What do you think? Have I got this right?