hi all

i have a di4000-tc and i am in t/west
my jtag is tis 1 http://shop.jabsplace.co.uk/index.ph...roducts_id=132 from jabs

i am trying 2 jtag it but i keep getting error 43 unable 2 put target into background mode.
i have tryid whive ocd and bke v2.1 and 2.2 macmod is runing and all my soldring on the bord is ok but still no good
the colers on the tut are difront fom my jtag but i have got them on as thay shod be .
plz can you all help me

double check the connection also make sure you dont have any excess solder

join pin 8 and 15 i had same prob it cured it

8 and 15 on the end of my jtag ??

thanks for you help it is sorted now
i have put a post up telling pepol how i did it so it may help them

Originally Posted by mr-x-

thanks for you help it is sorted now
i have put a post up telling pepol how i did it so it may help them

i m8 how did u solve the problem, i have the same jtag, and the box is a sammy 2100c

This is how I got my jtag-universal from jabsplace 2 work
1st of the colors on the jtag are not the same as on the tuts
They are
VCD is red
GND is yellow
TDI is orange
TMS is blue
TCK is black
TDO is green

And the last 1 that you do not use is
TRST is white

You must also solder a piece of wire from pin 8 to pin 15 on you jtag
To do this just tack the top of your jtag bye undoing the 2 screws that hold it 2 gever
Look in to the end that goes in 2 your pc to see the numbers then just join pins 8 and 15
2 gever.

That shod be it