Welcome to the Digitalworldz UK VU+ Section Forums, Discussing Can anyone explain this.

A while a go i made a thread about a Duo Clone with tuner issues

http://www.digitalworldz.co.uk/28553...-clone-bh.html

Ive done a video to show you what its doing as i cant get my head round it,



I hope someone can figure out what this from the video cos im stumped

cheers

Signals not locked m8, does the feed ( sat cable ) work and lock on another box ?

yep, works perfectly on another box, locks perfect

first of I would put a F connector on that cable,

Try in tuner B and have that configured, and dis-configure tuner A to nothing

it did have one on, reason it was off was because i was trying some movement with the cable and connection, the signal doesnt even fluctuate like it did with the F connector off

Originally Posted by segel

Try in tuner B and have that configured, and dis-configure tuner A to nothing

That config works, nothing wrong with tuner B mate

That's not how you cabled up at the LNB end is it?

As said above I'd screw an f-connector onto it and see if that make a diff.

So it works and signal comes in on Tuner B? if so mate Tuner A is faulty!

Originally Posted by IAmATeaf

That's not how you cabled up at the LNB end is it?

As said above I'd screw an f-connector onto it and see if that make a diff.

LOL no mate, but its worse with an F connector attached