hello
im having problems with my tm500 super, i cant get the enigma web interface to work or im doing somthing wrong??
thanks in advance for any help

Hey m8

Best of posting in this forum as it is dedicated to Technomate Receivers and you will find more help in there:Satellite - Technomate (linux) Receivers

Can you explain what exactly is wrong with your webinterface?
Are you using vlc to watch the stream?

If you are trying to edit the files, you need miniweb, although you can also ftp into the receiver and alter files that way.
Bear in mind that, to the web program on your PC, the IP address/web page is the same. You may need to re-download the page instead of opening a cached one. CRTL and F5 on Firefox.

Originally Posted by fruitball

Hey m8

Best of posting in this forum as it is dedicated to Technomate Receivers and you will find more help in there:Satellite - Technomate (linux) Receivers

Can you explain what exactly is wrong with your webinterface?
Are you using vlc to watch the stream?

hello
iv got the tm500 linked though my rotor, this is the info i used to get it linked to download the leatest image:
Tm 500 & tm 600 how to load a ur image

First of all get the reciever all wired up before hitting the power make sure network cable is in...
open the front flap and hold your finger down on the power button then flick the power switch on at the back, KEEP YOUR FINGER HELD DOWN ON THE FRONT POWER BUTTON, keep it there until you see a number, now this number will be the end part of its ip address for example if it says 3 your ip address for the box will be 192.168.1.3 or obviously if your router has a different ip combination it will be the last digit of the ip address.
Now open up your internet browser on your pc and in the address bar just type out the IP address then click go this will then let you in to the technomate loading portal all you do is click browse which will be the location of the UR image you have downloaded find it and then double click, then click download, the image will now go in, once finished it will say done on the front panel just restart the machine..
YOUR STILL NOT DONE!!!!!
its very important you first do a factory reset
so press ok on english and then just exit out of the rest until you come to the enigma info bar press menu on remote goto setup, then expert setup, then factory reset...once restarted the box is then ready to go
TIP: blue x2 lets you to the blue panel download where you can get latest channel list etc>>>>>
HAVE FUN

(not my work, credits go to the author)

so was able to link the box to my laptop, change channel-control volum and even go onto technomates web page but cant get any images, when i click on image tab it only shows up a message saying avilable image but doesnt show any images?? wot im i doing wrong?
thanks in advance for any help

Right just to be clear... You have loaded firmware to your receiver and you want to view the channels via your computer? e.g stream from box to your pc

If so then you will need VLC player which can be obtained via google first and formost.

Can you clarify it for me so I can tell you what to do.

Regards

Fruit

Originally Posted by fruitball

Right just to be clear... You have loaded firmware to your receiver and you want to view the channels via your computer? e.g stream from box to your pc

If so then you will need VLC player which can be obtained via google first and formost.

Can you clarify it for me so I can tell you what to do.

Regards

Fruit

hello
i have't got any firmwear on the box yet, thats my problem, sorry for not being clear, i can connect the box to my laptop but cant get the leatest frimwear/image? think the leatest one is Qi image?
thanks for your help

Right gotcha now.

1. plug the box up to the telly and perform a factory reset on it
2. once it has reloaded go to settings and then networks and find out the ip address

Best way I can advise is to flash the unit via the ethernet... So plug in to a telly and an ethernet port from your router and get an ip address so you know where to send the image or obtain your ip from guide you posted.

Then you open the loader... insert IP ADDRESS of your machine then root... cannot remember what default password... it is either technomate... password or blank and send the image over via ethernet.
Download your image and install to box via loader

Here is a loader. loader.rar

1.png
Select your image you want to use (that you have downloaded)
2.png

Make sure you factory reset and you have loaded your image

Originally Posted by fruitball

Right gotcha now.

1. plug the box up to the telly and perform a factory reset on it
2. once it has reloaded go to settings and then networks and find out the ip address

Best way I can advise is to flash the unit via the ethernet... So plug in to a telly and an ethernet port from your router and get an ip address so you know where to send the image or obtain your ip from guide you posted.

Then you open the loader... insert IP ADDRESS of your machine then root... cannot remember what default password... it is either technomate... password or blank and send the image over via ethernet.
Download your image and install to box via loader

Here is a loader. loader.rar

1.png
Select your image you want to use (that you have downloaded)
2.png

Make sure you factory reset and you have loaded your image

thanks kate your a star
ill give that a go tomorrow and let you know
i cant thank you enough, iv been looking the web all day to no avail, thank you!!!

Originally Posted by slyboxhd

thanks kate your a star
ill give that a go tomorrow and let you know
i cant thank you enough, iv been looking the web all day to no avail, thank you!!!

Not a problem m8... Just a heads up.. Im not Kate lol

Remember to factory reset before and after.... just download what image you want of the web and load it via that software (loader) ... there a different loaders available... if you have issues with that loader... simple google loader for tm500!

If you get stuck either myself or many members on here will give you a hand...

Regards

Fruitball AKA KATE LOL

I will make vid tomorrow when I can be arsed to get out of my bed on flashing the technomate via ethernet