Hi installed rom manager on the wifes avent vega which she was having for christmas. Asked it to backup the rom, the machine shut down now I cant get it to boot to recovery mode. Any help please.

This may help,you need to use a program called vegafixer

all instructions are shown by VegaFixer when you start it, but here is a step by step instruction:

1. Take your SDcard out of your tablet and attach it to your PC
2. Start VegaFixer.jar.
3. Click on “Find my backup”
4. Navigate to your SDcard, clockworkmod folder, backup folder and select the backup you want to restore.
5. Click on “Create this backup”
6. Wait until VegaFixer finished creating the backup. (“Find my backup” text changes from light grey to black)
7. Open the VegaFixer folder on your hard disk
8. Start your Vega in NVFlash recovery mode, make sure power and USB cable to PC are attached before you enter NVFlash recovery mode.
9. Double click “SuperVegaRestore.bat” (Windows) or SuperVegaRestore.sh (Linux)
10. Your Vega will be restored.

Thanks for your help wiz, but I cant get the machine into recovery mode. Am I missing something?

Originally Posted by stelladrinka

Thanks for your help wiz, but I cant get the machine into recovery mode. Am I missing something?

From what I can see m8 you can restore the backup you took using a program called vegafixer and the above instructions,
of course this is providing you have a backup stored on the memory card.

This I presume will return the Vega to the state it was before you meddled with it,I think lol

Got it to start loading the image then I get error message bootloader.bin not found any ideas please.

Found this on another site and it worked for the guy with the same problem


How about,backup your apps + data using backup app or titanium,then wipe everything and do a fresh installation ,restore all your apps again. Just my opinion.

Ok thanks. I did this and the Vega appears with wording of 'Entering NV Flash'.

I ran the SuperVegaRestore.bat and the following is displayed on the command prompt:


C:\Users\E6400\Downloads\VegaFixer>tools\nvflash.e xe --bct tools\H5PS1G83EFR-S6C
_V24_0625.bct --setbct --bl tools\bootloader.bin --configfile tools\flash.cfg --
odmdata 0x0b0c0075 --create --go
Nvflash started
rcm version 0X20001
System Information:
chip name: t20
chip id: 0x20 major: 1 minor: 3
chip sku: 0x8
chip uid: 0x0280324941c120d7
macrovision: disabled
hdcp: enabled
sbk burned: false
dk burned: false
boot device: nand
operating mode: 3
device config strap: 0
device config fuse: 0
sdram config strap: 0

sending file: tools\H5PS1G83EFR-S6C_V24_0625.bct
- 4080/4080 bytes sent
tools\H5PS1G83EFR-S6C_V24_0625.bct sent successfully
odm data: 0xb0c0075
downloading bootloader -- load address: 0x108000 entry point: 0x108000
sending file: tools\bootloader.bin
| 941512/941512 bytes sent
tools\bootloader.bin sent successfully
waiting for bootloader to initialize
bootloader downloaded successfully
setting device: 1 0
creating partition: BCT
creating partition: PT
creating partition: EBT
creating partition: MSC
creating partition: SOS
creating partition: LNX
creating partition: APP
creating partition: CAC
creating partition: USP
creating partition: UDA
Formatting partition 2 BCT please wait.. done!
Formatting partition 3 PT please wait.. done!
Formatting partition 4 EBT please wait.. done!
Formatting partition 5 MSC please wait.. done!
Formatting partition 6 SOS please wait.. done!
Formatting partition 7 LNX please wait.. done!
Formatting partition 8 APP please wait.. done!
Formatting partition 9 CAC please wait.. done!
Formatting partition 10 USP please wait.. done!
Formatting partition 11 UDA please wait.. done!
done!
file not found: bootloader.bin
failed executing command 2147483647 NvError 0x4
command failure: create failed
Press enter to continue:



Then nothing else happens after that.

At the end of that text, it says 'file not found: bootloader.bin'. I looked in the directory 'C:\Users\E6400\Downloads\VegaFixer\tools'
and there is a bootloader.bin. Hope that can give you some clue.

UPDATE: I copied the files, 'VegaFixer' had created in the 'Tools' folder and copied them to one folder level up to the VegaFixer folder, than I ran SuperVegaRestore.BAT and all is well now. Some apps don't work properly but none the less, its 'Alive' again.

Thanks all, panic over reinstalled the vega image along with the bootloader. Just got to root it again. Thanks again.

Originally Posted by stelladrinka

Thanks all, panic over reinstalled the vega image along with the bootloader. Just got to root it again. Thanks again.

No bother m8,Glad your sorted