SHOULD I GIVE UP?!

Ash, are you still trying to use the bridged connection. On your laptop check if both the wireless connection and the wired connection show diconected and check that the brige connection shows connected. Then check you have internet access on your laptop. If all that is in place go to a pay chanell on your box disconnect he lan conection from the box and reconnect it and it should clear.

Untitled.jpg

CHAPS.

this is what my network status is like. did what you said but still pay channels no work!!
please advise!!
cheers

HI

whatever ive done has given me an ip address BUT no nameserver and the pay channels still not working...

what do i do about this nameserver business?

Is DHCP on or off on he box, has the line your a using been tested working anywhere.

Maybe dont bother with routers that only have b and g compliance. I have a samsung galaxy europa and works brilliantly. Ok you dont need one of these but these phones come with the 'N' Compliance as well as all B and G ones. So, I'm saying that maybe it is the specs on the Vonet which are incorrect. Try it and see if it works

I have had the same problem but I have solved it .. it is you need to do install the program on the computer and then start it then coming there's 2 field on top of each other, you choose your internet wifi name on the bottom and then go on the top felt and selects it and so far completed

I'm having trouble setting the Vonets VAP11G USB WiFi Bridge too. I'm trying to use it with my Ariva 120 combo.
I've followed all the instructions; loaded up software found my vodafone wireless router. Installed winpcap. Connected
bridge to laptop using RJ45 and usb, got 100% signal to router and then i was prompted with "configuration completed sucessfully"
So disconnected bridge from laptop and inserted into Ariva using RJ45 and usb. Have ensured that my DCHP on both the router and Ariva is enabled. But still the Ariva does not connect to the internet and has no ip adressed assigned?
Anybody have ever have a similiar problem and get it solved?
Malermester can you expand on how you solved the problem from the previous post?

Got sorted. At it all weekend. If anyone needs help with vonets and routers give me a shout

Just a note to anyone trying to run one of these with a Skybox F3, they will not work unless encryption is turned of on the router.