hi guys
i brought a s-reg 206 1.1 for the mrs ... gave it a quick service 2day filters oil etc... noticed a tearing noise coming from the cluch when the car is ticking over but goes when you press the pedal in......
am i rite in thinking it's the thrust bearing/relise bearing?

anyone ever done one?
d.i.y or garage?


thx guys

yes bearing gone,not good to drive car car as more damage may be done,unless you have access to a load of tools i would say garage job

cheers fella :-)
wht tools would i need i have a large tool box lol

jack and axle stands,better if you have a hoist the one with button for up and down13mm socket and ring spanner,oil drainer to drain oil and to refill gearbox again,8mm allen sockets for gearbox,also maybe15,16,17.and 18mm sockets and spanners,you will also need 2 jacks one for supporting engine and one for gearbox and watch your head when gearbox falls on it as its heavy and solid

If you are doing the release bearing, it's best to replace the clutch also. While you are in there and all that


Sent from my iPhone using fingers and thumbs!

[ame=http://www.youtube.com/watch?v=Ppg_70IM_qQ&feature=fvwrel]YouTube - Replacing A Clutch In Your Vehicle.[/ame]
[ame=http://www.youtube.com/watch?v=wsTKhg21WU0]YouTube - How to remove and replace a peugot 206 clutch.[/ame]

if ya dont realy no what ya doing just bang it in a garage
but make sure its some 1 recomended becouse it has been known just to replace the prob then a few months down the line the clutch might start slipping

always replace as a 3 piece kit,unless you have an unlucky car that has a duel mass flywheel also

thx for ur help guys 7hours and it's all sorted.....

why did you put clutch plate in backwards lol,well done