You need DCCE2 for the VU+Duo. If you sellect connect it sholud find your computers IP address then you need to enter your IP addresses for the receiver, and the router or you can search for these with DCCE2, then select connect and you should get all green lines to show all are connected. Now you have to select Telnet tab and in the dos prompt type in "passwd" it will ask you to enter a new password enter it and enter it will ask you to confirm enter it again and enter thats it you password will be entered. go back to the top tab configuration tab/network. out your password in there press connect again and when you get all green lines select FTP and it should let you in.
sorry mate i dont understand what you mean...can you explain in a little more detail
right m8 install this first of all,
then change language to english, then the right handside window put your box ip in there and on the left handside where user and pass are it is root and pass is leave blank, unless you have changed it then click connect, then post back you have done this
Did you get it up and running? if so did you take notes??
Are you having problems mate ?
Well i guess itís more a lack of knowledge than a problem! Been reading forums like crazy now kinda understand the theory but lack the practical. Iíve got it imaged and setup so i get like a million bbc/itv/c4/five channels. But Iíd like to get the HD ones and the other freeview ones before i even think about the advanced level stuff. Iím thinking itís because its scanned the satellite which just has these channels rather than the main one. Although i did scan the astra 28.2 and it found the normal sly channels i canít actually see them listed anywhere. I think i need to delete the astra 19 ones first to show up the other ones?
The best ftp prog I found for this transfer is Dreambox-CCcamconfig-Editor
I didn't scan the sats mate. All i did was put an image on, then use dreamboxedit to ftp the attached bouquet to the vu and thats it . All the channels you'll need
cheers got the standard channels now just need to work out how the get the others
Methinks this cs stuff its more of a headache than i orginally thought ;(
ok i think i messed it up - it keeps saying sat not connected but it is - im gonna re-image it now.
wooohooo dont you love it when you spend hours on something and find out it was a really stupid little thing!! i used a little c instead of a big C!
may be some one can do a video how to ftp your cccam lines into the duo
Hi -I have today flashed the latest Vix image onto my Duo..
and downloaded cccam 2.2.1 (is this the right one, BTW).
Anyway, now I am trying to use DCC to ftp the cccam.cfg file to my pc for editing...which is something I have done ok before.
But I cannot find my cccam.cfg file in var etc (or anywhere else) - is there an install cccam step that I have missed here?
you have got the right version of cccam and the cfg goes in /etc
not var/etc in enigma 2 based images.
I have made a cccam.cfg file and it is in in the right place...and I'm sure the cccam.cfg text is correct and saved ok....
but if I click the green "start" button in the 'Softcam setup" menu, I get the error message:-
"No Config files found, please setup CCcam first in /etc/CCcam.cfg
Is there some particular way to start the softccam?
Any tips welcome,
thanks in advance, D
This what i use on my Duo mate and it works just fine.
Put your own details into it.
SERVER LISTEN PORT : 12000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : root
WEBINFO PASSWORD : dreambox
TELNETINFO USERNAME :
TELNETINFO PASSWORD :
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :5
OSD USERNAME :
OSD PORT :80
# SERIAL READER :
# SMARTCARD WRITE DELAY :
# SMARTCARD CLOCK FREQUENCY: /dev/
SMARTCARD CLOCK FREQUENCY: /dev/sci0 3430000 #lower
# SMARTCARD CLOCK FREQUENCY: /dev/sci1 3570000 #upper
SHOW TIMING : yes
DEBUG : yes
NEWCAMD CONF :no
DISABLE EMM : no
MINI OSD : no
BOXKEY: /dev/sci0 xx xx xx xx
#BEEF ID :
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinf
Thanks Charlie, tho is that in reply to my post #49?
sorry if daft question but is that a cccam.cfg file....I saw elsewhere that we only need one line in a cccam.cfg file?
Or , where do you put all that info in your Duo (I have vix image)
Yes you just copy and paste the Cline into the cccam.cfg. Most of the time it's just one line.
Download and install filezilla then
you need to get the i.p address of the box from the network settings and input that into host then in username input root and leave password blank
your folder will show that are on the box
from there double click etc and it will open and then drag in the cfg file
OOOPs...I had the capital "C" problem...my cccam.cfg file was not correctly saved (as CCcam.cfg) !
So the VuDuo softcam manager does now see it!
I don't know about the settings mentioned by Charley tho.
The settings in that config will work as server or a client.
I you are just a client add your cline to the bottom.