Dibbers

i know i posted this ages and that ago in the General section but thought i'd give it another bash....apperently this was on the net but can't find any thing about it....any one know if it's true or heard of it before?

__________________
What comes around goes around my friend

phawk754

it was true as i did it to my old car ,,i think it was on here some where .......just not sure where now ....sorry

__________________
Guns don't kill people, people kill people

Dibbers

no problem will keep looking for it, did you have to take the unit out the car? and was it easy to do?

__________________
What comes around goes around my friend

phawk754

i had to take the unit out, then take the chip of the board and reprogam it with the new hex


i am sure it was only for the VAUXHALL Vectra buit in traffic master

__________________
Guns don't kill people, people kill people

Dibbers

Cheers man will keep looking for it mate

__________________
What comes around goes around my friend

phawk754

do not know if you still need this but i was looking at some old harddrivers the other day and find the info you need

this is what it says in the read me ,,not sure if this is working now or not

TMv2

This is for the newer type (black plastic box) as fitted in the Vectra
Remove the glovebox 2 screws at the top 2 screws at the bottom

the TM is a black plastic box with 2 white plug in one end 1 2X2 AND 1 4X4

unplug the 2 plugs from the box and remove it

open the box and slide out the PCB

the eeprom is a 93c46 surface mount bottom left of the board

you have to remove the eeprom as it will not read in place

make a backup copy (just incase)

write the TMv2 dump to the eeprom and refit it

refit the box back into the car and switch on TM and your sorted


and

TMv1

This is for the older type (silver box) as fitted in the Vectra
Remove the glovebox 2 screws at the top 2 screws at the bottom

there will be a wire taped to the top of the box this is the ariel for the TM trace it back and it will be pluged into a silver box

unplug the 3 plugs from the box and remove it

open the box take out the 3 screws holding in the PCB and the nut at the ariel connection lift out the PCB
turn it over the eeprom is a 93c46 surface mount almost dead centre of the board

you have to remove the eeprom as it will not read in place

make a backup copy (just incase)

write the TMv1 dump to the eeprom and refit it

refit the box back into the car and switch on TM and your sorted (if TM does not come on you will have to disconnect the car battery for a min to reset it all hope you have your radio code)

Attached Files

trafficmaster hack.rar (1.5 KB, 4 views)

__________________
Guns don't kill people, people kill people

Dibbers

absolutely awesome find mate! top class !

__________________
What comes around goes around my friend

phawk754

i just hope it still working for you mate ,have fun with it

__________________
Guns don't kill people, people kill people