Guides for noobs?

sasbionage

hi, are there any guides for noobies on things like Telnet, image types etc,,,?
i've spent days looking for any.(beginners guide doesn't cover these)

__________________
IP9000HD,,,DVB-C,DVB-S2,

bro

http://www.digitalworldz.co.uk/1499242-post1.html

__________________

bro

first flash that

DGSTATION is World best brand.

then get a program called putty and using your usb stick and putty do this


format usb stick in pc first

1. Boot your DGS image, wait to full boot. when picture comes on
2. Insert your USB stick
3. Telnet to your box, execute mount
4. In the list check - if the /dev/sda2 is mounted (if is FAT probably is mounted to /mnt/usb/usb0)
5. umount it - umount /mnt/usb/usb0
6. now execute fdisk /dev/sda (not sda2)
7. on the prompt press p - to see current partition table
8. press d - to delete partitions, if it is only one proceed, if not - press d again and delete all partitons
9. press p again - there will be no partitons now
10. Press n - to create new partition
11. select p - primary
12. select 1
13. press enter, enter
14. press w to write changes & exit
15. You have just created linux partition on your usb stick
16. Now format this partition - mkfs.ext3 /dev/sda2
17. mount formatted partition again - mount -t ext3 /dev/sda2 /mnt/usb/usb0
18. Now ftp e2 tar.gz to /mnt/usb/usb0
19. execute cd /mnt/usb/usb0
20. execute tar -zxvf e2image.tar.gz, wait few minutes to decompress all. (wait for prompt)
change the red writing bit to the name of the e2 image file you ftp to stick
21. after decompress type, sync


for reciever without hardrive in it


and ftped image file can be deleted of stick when done if you want

__________________

sasbionage

ok m8, do that now,

__________________
IP9000HD,,,DVB-C,DVB-S2,

sasbionage

just noticed you said for box without hdd,,,mine has a 250g?

__________________
IP9000HD,,,DVB-C,DVB-S2,

sasbionage

after install DGS it's just getting as far as booting? holding down number buttons gives multiboot1 etc on lcd?

__________________
IP9000HD,,,DVB-C,DVB-S2,

sasbionage

pls help,,,now i'm stuck at booting?

__________________
IP9000HD,,,DVB-C,DVB-S2,

bro

sorry mate,heres the way for one with hardrive


++++++++++++++++++++++++++++++++++++++++++
1. Boot your DGS image, wait to full boot.
2. Insert your USB stick
3. Telnet to your box, execute mount
4. In the list check - if the /dev/sdb1 is mounted (if is FAT probably is mounted to /mnt/usb/usb0)
5. umount it - umount /mnt/usb/usb0
6. now execute fdisk /dev/sdb (not sdb1)
7. on the prompt press p - to see current partition table
8. press d - to delete partitions, if it is only one proceed, if not - press d again and delete all partitons
9. press p again - there will be no partitons now
10. Press n - to create new partition
11. select p - primary
12. select 1
13. press enter, enter
14. press w to write changes & exit
15. You have just created linux partition on your usb stick
16. Now format this partition - mkfs.ext3 /dev/sdb1
17. mount formatted partition again - mount -t ext3 /dev/sdb1 /mnt/usb/usb0
18. Now ftp e2 tar.gz to /mnt/usb/usb0
19. execute cd /mnt/usb/usb0
20. execute tar -zxvf e2image.tar.gz, wait few minutes to decompress all. (wait for prompt)
21. after decompress type, sync


to unmount just

cd /
umount /dev/sdb1
++++++++++++++++++++++++++++++++++++++++++++++++++ ++
Hope this will help you,because it helped me always unpack.Wait a little,15-30 sec, after sync.


to get ur box back on

when totally powered off hold number 3 button on remote control and whilst powering up keep hold of that button for 5 seconds then let go and it will boot to normal image

do that tut above to the letter and when done this time while powering up press the number 2 button for 5 seconds and it will boot to enigma 2

__________________

sasbionage

how do i use telnet?(have already asked)

__________________
IP9000HD,,,DVB-C,DVB-S2,

sasbionage

ok, have done a google on telnet,,,but i can't turn it on? keeps saying error!! any ideas?

__________________
IP9000HD,,,DVB-C,DVB-S2,