despdan

If they are still using the N2 stream I dont see why not make sure your using the mips version

1184jap

@despdan
Tried the MIPS version from your "rqcamd.rar" file. But no luck.

despdan

@1184jap
Did you install the roms?
telnet to the box /var/bin/rqcamd & post the out put here.

Make sure you set the default cam to common interface first.

1184jap

ROM's loaded

rqcamd version 1.27, cam daemon by raton_craquero.
rqcamd is free software! -- visit the rqcamd homepage at:
:: www.rq-stuff.com ::

Usage: rqcamd [OPTION] ...

The following files are required:
General keyfile: /var/keys/Autoupdate.Key
Opkey Keyfile: /var/keys/Keylist.txt

These are the currently supported options for rqcamd:
-help Show this information.

-debug-level <n> Specifies the level of detail (n) when displaying debug
messages to the console (default is 1):
0 - Silent
1 - Basic information messages.
2 - Detailed debug information.
3 - Show all available debug info.

-decrypt-mecm <prov_id> <mecm_id>
Decrypt and show <mecm_id> (0x40 or 0x60) MECM
for specified <prov_id>.

-encrypt-url <url>
Generate an encrypted URL for use in CS configuration.

-n2stream <file> <ecm/emm/all> <full|summary>
Process and execute a Nagravision 2 stream file.

Using config file: /var/keys/rqcamd.conf

rqcamd version 1.27, cam daemon by raton_craquero.
rqcamd is free software! -- visit the rqcamd homepage at:
:: www.rq-stuff.com ::

Usage: rqcamd [OPTION] ...

The following files are required:
General keyfile: /var/keys/Autoupdate.Key
Opkey Keyfile: /var/keys/Keylist.txt

These are the currently supported options for rqcamd:
-help Show this information.

-debug-level <n> Specifies the level of detail (n) when displaying debug
messages to the console (default is 1):
0 - Silent
1 - Basic information messages.
2 - Detailed debug information.
3 - Show all available debug info.

-decrypt-mecm <prov_id> <mecm_id>
Decrypt and show <mecm_id> (0x40 or 0x60) MECM
for specified <prov_id>.

-encrypt-url <url>
Generate an encrypted URL for use in CS configuration.

-n2stream <file> <ecm/emm/all> <full|summary>
Process and execute a Nagravision 2 stream file.

Using config file: /var/keys/rqcamd.conf

Loading ROM102 ROM file...
Loading ROM102 EEPROM file for provider 0101...
Loading ROM102 EEPROM file for provider 0901...
Applying ROM102 EEPROM Patches...

Configuration settings:
Box type: Dreambox
Debug level: 1
EEPROM updates: On
Log output to file: No


cam[di:-]: Ready.

[Console Server]: Error binding listening socket to local interface.

[HTTP Server]: Error binding listening socket to local interface.


SR | SID:0602, NS:FFFF0000, TSID:0006, ONID:A701, PMT PID:0021, DM:1, DMX:0
Root CA Info | CA Descriptors: 2
CA Descriptor | CAID: 1801, ECM PID: 0632
CA Descriptor | CAID: 1802, ECM PID: 0682

PID Section | Type: 02 [MPEG2 Video], PID: 0602, CA Descriptors: 0
PID Section | Type: 04 [MPEG2 Audio], PID: 06A2, CA Descriptors: 0
PID Section | Type: 06 [Teletext/VBI], PID: 06D2, CA Descriptors: 0
cam[di:-]: Can't decode. CA info not found.
cam[di:-]: Removing inactive service (SID: 0602).

SR | SID:0602, NS:FFFF0000, TSID:0006, ONID:A701, PMT PID:0021, DM:1, DMX:0
Root CA Info | CA Descriptors: 2
CA Descriptor | CAID: 1801, ECM PID: 0632
CA Descriptor | CAID: 1802, ECM PID: 0682

PID Section | Type: 02 [MPEG2 Video], PID: 0602, CA Descriptors: 0
PID Section | Type: 04 [MPEG2 Audio], PID: 06A2, CA Descriptors: 0
PID Section | Type: 06 [Teletext/VBI], PID: 06D2, CA Descriptors: 0
cam[di:-]: Can't decode. CA info not found.
cam[di:-]: Removing inactive service (SID: 0602).

SR | SID:0602, NS:FFFF0000, TSID:0006, ONID:A701, PMT PID:0021, DM:1, DMX:0
Root CA Info | CA Descriptors: 2
CA Descriptor | CAID: 1801, ECM PID: 0632
CA Descriptor | CAID: 1802, ECM PID: 0682

PID Section | Type: 02 [MPEG2 Video], PID: 0602, CA Descriptors: 0
PID Section | Type: 04 [MPEG2 Audio], PID: 06A2, CA Descriptors: 0
PID Section | Type: 06 [Teletext/VBI], PID: 06D2, CA Descriptors: 0
cam[di:-]: Can't decode. CA info not found.
cam[di:-]: Removing inactive service (SID: 0602).

SR | SID:0602, NS:FFFF0000, TSID:0006, ONID:A701, PMT PID:0021, DM:1, DMX:0
Root CA Info | CA Descriptors: 2
CA Descriptor | CAID: 1801, ECM PID: 0632
CA Descriptor | CAID: 1802, ECM PID: 0682

PID Section | Type: 02 [MPEG2 Video], PID: 0602, CA Descriptors: 0
PID Section | Type: 04 [MPEG2 Audio], PID: 06A2, CA Descriptors: 0
PID Section | Type: 06 [Teletext/VBI], PID: 06D2, CA Descriptors: 0
cam[di:-]: Can't decode. CA info not found.
cam[di:-]: Removing inactive service (SID: 0602).

SR | SID:0602, NS:FFFF0000, TSID:0006, ONID:A701, PMT PID:0021, DM:1, DMX:0
Root CA Info | CA Descriptors: 2
CA Descriptor | CAID: 1801, ECM PID: 0632
CA Descriptor | CAID: 1802, ECM PID: 0682

PID Section | Type: 02 [MPEG2 Video], PID: 0602, CA Descriptors: 0
PID Section | Type: 04 [MPEG2 Audio], PID: 06A2, CA Descriptors: 0
PID Section | Type: 06 [Teletext/VBI], PID: 06D2, CA Descriptors: 0
cam[di:-]: Can't decode. CA info not found.
cam[di:-]: Removing inactive service (SID: 0602).

SR | SID:0602, NS:FFFF0000, TSID:0006, ONID:A701, PMT PID:0021, DM:1, DMX:0

despdan

Check your config file for:

1184jap

changed force_enigma_version=2
output much the same

rqcamd version 1.27, cam daemon by raton_craquero.
rqcamd is free software! -- visit the rqcamd homepage at:
:: www.rq-stuff.com ::

Usage: rqcamd [OPTION] ...

The following files are required:
General keyfile: /var/keys/Autoupdate.Key
Opkey Keyfile: /var/keys/Keylist.txt

These are the currently supported options for rqcamd:
-help Show this information.

-debug-level <n> Specifies the level of detail (n) when displaying debug
messages to the console (default is 1):
0 - Silent
1 - Basic information messages.
2 - Detailed debug information.
3 - Show all available debug info.

-decrypt-mecm <prov_id> <mecm_id>
Decrypt and show <mecm_id> (0x40 or 0x60) MECM
for specified <prov_id>.

-encrypt-url <url>
Generate an encrypted URL for use in CS configuration.

-n2stream <file> <ecm/emm/all> <full|summary>
Process and execute a Nagravision 2 stream file.

Using config file: /var/keys/rqcamd.conf

rqcamd version 1.27, cam daemon by raton_craquero.
rqcamd is free software! -- visit the rqcamd homepage at:
:: www.rq-stuff.com ::

Usage: rqcamd [OPTION] ...

The following files are required:
General keyfile: /var/keys/Autoupdate.Key
Opkey Keyfile: /var/keys/Keylist.txt

These are the currently supported options for rqcamd:
-help Show this information.

-debug-level <n> Specifies the level of detail (n) when displaying debug
messages to the console (default is 1):
0 - Silent
1 - Basic information messages.
2 - Detailed debug information.
3 - Show all available debug info.

-decrypt-mecm <prov_id> <mecm_id>
Decrypt and show <mecm_id> (0x40 or 0x60) MECM
for specified <prov_id>.

-encrypt-url <url>
Generate an encrypted URL for use in CS configuration.

-n2stream <file> <ecm/emm/all> <full|summary>
Process and execute a Nagravision 2 stream file.

Using config file: /var/keys/rqcamd.conf

Loading ROM102 ROM file...
Loading ROM102 EEPROM file for provider 0101...
Loading ROM102 EEPROM file for provider 0901...
Applying ROM102 EEPROM Patches...

Configuration settings:
Box type: Dreambox
Debug level: 1
EEPROM updates: On
Log output to file: No


cam[di:-]: Ready.


SR | SID:0602, NS:FFFF0000, TSID:0006, ONID:A701, PMT PID:0021, DM:1, DMX:0
Root CA Info | CA Descriptors: 2
CA Descriptor | CAID: 1801, ECM PID: 0632
CA Descriptor | CAID: 1802, ECM PID: 0682

PID Section | Type: 02 [MPEG2 Video], PID: 0602, CA Descriptors: 0
PID Section | Type: 04 [MPEG2 Audio], PID: 06A2, CA Descriptors: 0
PID Section | Type: 06 [Teletext/VBI], PID: 06D2, CA Descriptors: 0
cam[di:-]: Can't decode. CA info not found.
cam[di:-]: Removing inactive service (SID: 0602).

SR | SID:0602, NS:FFFF0000, TSID:0006, ONID:A701, PMT PID:0021, DM:1, DMX:0
Root CA Info | CA Descriptors: 2
CA Descriptor | CAID: 1801, ECM PID: 0632
CA Descriptor | CAID: 1802, ECM PID: 0682

PID Section | Type: 02 [MPEG2 Video], PID: 0602, CA Descriptors: 0
PID Section | Type: 04 [MPEG2 Audio], PID: 06A2, CA Descriptors: 0
PID Section | Type: 06 [Teletext/VBI], PID: 06D2, CA Descriptors: 0
cam[di:-]: Can't decode. CA info not found.
cam[di:-]: Removing inactive service (SID: 0602).

SR | SID:0602, NS:FFFF0000, TSID:0006, ONID:A701, PMT PID:0021, DM:1, DMX:0
Root CA Info | CA Descriptors: 2
CA Descriptor | CAID: 1801, ECM PID: 0632
CA Descriptor | CAID: 1802, ECM PID: 0682

PID Section | Type: 02 [MPEG2 Video], PID: 0602, CA Descriptors: 0
PID Section | Type: 04 [MPEG2 Audio], PID: 06A2, CA Descriptors: 0
PID Section | Type: 06 [Teletext/VBI], PID: 06D2, CA Descriptors: 0
cam[di:-]: Can't decode. CA info not found.
cam[di:-]: Removing inactive service (SID: 0602).

SR | SID:0602, NS:FFFF0000, TSID:0006, ONID:A701, PMT PID:0021, DM:1, DMX:0
Root CA Info | CA Descriptors: 2
CA Descriptor | CAID: 1801, ECM PID: 0632
CA Descriptor | CAID: 1802, ECM PID: 0682

PID Section | Type: 02 [MPEG2 Video], PID: 0602, CA Descriptors: 0
PID Section | Type: 04 [MPEG2 Audio], PID: 06A2, CA Descriptors: 0
PID Section | Type: 06 [Teletext/VBI], PID: 06D2, CA Descriptors: 0
cam[di:-]: Can't decode. CA info not found.
cam[di:-]: Removing inactive service (SID: 0602).

SR | SID:0602, NS:FFFF0000, TSID:0006, ONID:A701, PMT PID:0021, DM:1, DMX:0
Root CA Info | CA Descriptors: 2
CA Descriptor | CAID: 1801, ECM PID: 0632
CA Descriptor | CAID: 1802, ECM PID: 0682

PID Section | Type: 02 [MPEG2 Video], PID: 0602, CA Descriptors: 0
PID Section | Type: 04 [MPEG2 Audio], PID: 06A2, CA Descriptors: 0
PID Section | Type: 06 [Teletext/VBI], PID: 06D2, CA Descriptors: 0
cam[di:-]: Can't decode. CA info not found.
cam[di:-]: Removing inactive service (SID: 0602).

despdan

Dont know why but the only way I can get your results is if I tune into a channel that isn't nagra2 (1801)This is what I get if channel is nagra2 (1801)But looking at yours you are tuned to 1801/1802 Post your rqcamd config file & I will see if anything is diff.

1184jap

Here it is despdan

################################################## ############################
# rqcamd configuration file #
# All configuration options in this file observe the same format: #
# <configuration_name>=<configuration_value> #
# #
# No white space is allowed on any place or the configuration entry will be #
# ignored. #
################################################## ############################

########################### general configuration ############################
[General]
# This sets the box type the emu will run on. Compatible boxes are:
# 0 - Dreambox
# 1 - Triple Dragon
# 2 - DGStation Devices (Mutant/Relook/CubeCafe)
box_type=0

# Enable or disable background execution
# 0 - Disable
# 1 - Enable
background_execution=1

# This forces the use of Enigma 1 or Enigma 2 PMT parsing. This defaults to
# E1 on PowerPC boxes and E2 on MIPS boxes.
# Use the following values:
# 0 - Use Default for Processor Type
# 1 - Enigma 1
# 2 - Engima 2
#
force_enigma_version=2

# This sets the level of console output for debugging:
# 0 - Silent, 1 - Basic debug info, 2 - Extended debug info,
# 3 - Show all debug info
debug_level=1

# Enables or disables eeprom updates. If enabled, when eeprom is updated a
# file will be written to /var/scce
# 0 - Off, 1 - On
eeprom_updates=1

# This option is used to allow or disallow the processing of decrypted EMM's
# that fail the signature check. Under normal circumstances this should be set
# to disallow (1) processing of invalid EMM's.
valid_emm_signature_required=1

# This option enables or disables the writing of debug information to the
# console.
log_to_console=1

# This option enables or disables the writing of console output to a log file
log_to_file=0

# When log_to_file is set to 1, this is the path and filename to write console
# ouput to.
logfile_name=/var/bin/rqcamd.log

# This option enables or disables the writing of N2 stream files.
log_to_n2stream=0

# When log_to_n2stream is set to 1, this is the path and filename to write
# the N2 stream file to.
n2stream_file_name=/var/bin/rqcamd.n2stream

# Used to activate on-screen messages. Username and password required if
# HTTP authentication is enabled on enigma.
on_screen_messages_show=1
on_screen_messages_username=root
on_screen_messages_password=
on_screen_messages_key_update=1
on_screen_messages_wait_for_key_update=0

# When activated, rqcamd will listen on the specified port for connections. All
# log activity will be broadcast in real-time to connected clients.
console_logs_broadcast=1
console_logs_broadcast_port=666

# Enable/disable rqcamd web interface (default port is 668).
# 0 - Disable
# 1 - Enable
webif=1
webif_port=668

############################ caid configuration ##############################
[CaID:1816]
ecm_table=80
priority=1

[CaID:1815]
ecm_table=8E
priority=2

[CaID:1810]
ecm_table=80
priority=3

[CaID:1801]
ecm_table=80
priority=4

[CaID:1234]
ecm_table=8E
priority=5

[CaID:095b]
ecm_table=80
priority=6

[CaID:0945]
ecm_table=80
priority=7

[CaID:0905]
ecm_table=80
priority=8

########################### provider configuration ###########################
# All parameters are in hexadecimal notation.

[Prov:0101]
# ----------------------------------------------------------------------------
emm_pid=0120
emm_g_table=82
emm_s_u_table=83
swap_control_words=0
ecm_nano_offset=10
hash_control_words=1
mecm_key=0106
mecm_40_address=91D7
mecm_60_address=92D7

# Decoder type indicates whether the cam will attempt to decode this provider
# in software, or through a card-server. Supported values are:
#
# 0 - Use internal softcams.
# 1 - Connect to a Newcamd protocol card-server.
decoder_type=0

# Used to enable or disable the processing of EMM's even when the emu is on
# CS mode. This will keep keys/mecms up to date:
# 0 - Off
# 1 - On
process_emms_on_cs_mode=0

# URL of card-server to use, formats are as follows:
#
# newcamd://<username>:<password>@<hostname>:<port>/<des_key>/[EMM]
#
# Example:
# newcamd://foo:bar@192.168.0.100:12345/0CE3476FF2E1C9D9A0A109B371E3/EMM
#
# NOTE: The "EMM" suffix is optional and tells the card-server client whether
# to send EMM's to the card-server or not. Enabling or disabling this only
# has effect if the card-server is configured to accept emms from this client.
#
# Multiple card-server url's can be specified for server fail-over.
# If the emu fails to connect or fails to get valid CW's, it will try to
# connect to other servers in a round-robin fashion.
#
# Up to 16 servers can be added from index 0 to 15.
#
# Additionally, encrypted card-server url's can be specified. To create
# an encrypted url, use the command-line options of rqcamd. Type rqcamd -help
#
card_server_url_0=newcamd://username:password@192.168.0.100:10550/0102030405060708091011121314/EMM

# This is is the 4-byte cam id in hexadecimal format used to filter emm-s and emm-u.
# The cam id provided by the card-server will be used automatically, however,
# if this cam-id is explicitly set, it will supercede the one provided by the
# card-server.
cam_id=00000000

# Enable or disable processing of EMM-G's (Global, they carry key updates).
process_emm_g=1

# Enable or disable processing of EMM-S's (Shared, they carry tier updates).
process_emm_s=0

# Enable or disable processing of EMM-U's. (Unique, they carry tier updates, activations/deactivations).
process_emm_u=0

[Prov:0901]
# ----------------------------------------------------------------------------
emm_pid=00F9
emm_g_table=82
emm_s_u_table=83
swap_control_words=0
ecm_nano_offset=14
hash_control_words=1
mecm_key=0907
mecm_40_address=91F5
mecm_60_address=92F5
decoder_type=0
card_server_url_0=newcamd://username:password@192.168.0.100:10550/0102030405060708091011121314/EMM
cam_id=00000000
process_emm_g=1
process_emm_s=0
process_emm_u=0

[Prov:FF00]
# this provider is a stand-in for NDS cards -----------------------------------
emm_pid=00C1
emm_g_table=00
emm_s_u_table=00
swap_control_words=0
ecm_nano_offset=00
hash_control_words=0
mecm_key=0000
mecm_40_address=0000
mecm_60_address=0000
decoder_type=0
card_server_url_0=newcamd://username:password@192.168.0.100:10550/0102030405060708091011121314/EMM
cam_id=00000000
process_emm_g=1
process_emm_s=0
process_emm_u=0

despdan

Ok you need to edit:
Prov:0101 To 5F01

1184jap

Made the change. No luck.
latest output.
Configuration settings:
Box type: Dreambox
Debug level: 3
EEPROM updates: On
Log output to file: No


cam[di:-]: Ready.

cam[di:-]: Message data:
9F 80 32 34 03 02 5A 07 00 1F 01 81 08 FF FF 00
00 00 06 A7 01 82 02 01 00 84 02 00 21 09 04 18
01 E6 32 09 04 18 02 E6 82 02 06 02 00 00 04 06
A2 00 00 06 06 D2 00 00


SR | SID:0602, NS:FFFF0000, TSID:0006, ONID:A701, PMT PID:0021, DM:1, DMX:0
Root CA Info | CA Descriptors: 2
CA Descriptor | CAID: 1801, ECM PID: 0632
CA Descriptor | CAID: 1802, ECM PID: 0682

PID Section | Type: 02 [MPEG2 Video], PID: 0602, CA Descriptors: 0
PID Section | Type: 04 [MPEG2 Audio], PID: 06A2, CA Descriptors: 0
PID Section | Type: 06 [Teletext/VBI], PID: 06D2, CA Descriptors: 0
cam[di:-]: Can't decode. CA info not found.
cam[di:-]: Removing inactive service (SID: 0602).
cam[di:-]: Message data:
9F 80 32 34 03 02 5A 07 00 1F 01 81 08 FF FF 00
00 00 06 A7 01 82 02 01 00 84 02 00 21 09 04 18
01 E6 32 09 04 18 02 E6 82 02 06 02 00 00 04 06
A2 00 00 06 06 D2 00 00