Ire N2 DVB-c Fix

gersrt · 28th June 2009, 23:40

Hi

As you may know there is now a dreambox n2 fix for Ireland.

As it is open source and the keys are now public, is there any way of getting this fix to run on v-plug or the likes.

Cheers Guys

nozzer · 29th June 2009, 12:38

afaik, if you put the keys into vplug and configure it properly then it will run just fine.

Use VPlug 2.4.2 or later

Enter the Op key as keyindex 00 for provider 5F01
Enter the modulus as keyindex M1 for provider 5F01
Also enter the modulus as keyindex M9 for provider 5F01
If you have the ECM verify key then you can also enter that as keyindex V for provider 5F01. You shouldn't need this though.

In v_emm.ini add the following -

Code:

[5E01]
PID=0081
Schedule=1
Active=1
 
[5F01]
PID=0081
Schedule=1
Active=1

In Vplug.ini add the following somewhere in the [main] section

Code:

CAID_IgnoreList=1800,1802
ProviderID_IgnoreList=5401,5501

you may already have these items added - just edit to include the above values so that N1 (1800) & N3 (1802) are ignored and that the old N1 providerIds (5401, 5501 for exNTL areas) are also ignored.

gersrt · 29th June 2009, 13:08

Cheers Mate.

So I don't need the hypercam then???

nozzer · 29th June 2009, 15:42

Quote:

Originally Posted by gersrt

Cheers Mate.

So I don't need the hypercam then???

tbh, I didn't know there was a hypercam for the PC.

Vplug will do the job though, as long as its set up to allow it. Not sure about stability as i've only ever tested it "remotely"

despdan · 29th June 2009, 15:58

Quote:

Originally Posted by nozzer

afaik, if you put the keys into vplug and configure it properly then it will run just fine.

Use VPlug 2.4.2 or later

Enter the Op key as keyindex 00 for provider 5F01
Enter the modulus as keyindex M1 for provider 5F01
Also enter the modulus as keyindex M9 for provider 5F01
If you have the ECM verify key then you can also enter that as keyindex V for provider 5F01. You shouldn't need this though.

In v_emm.ini add the following -

Code:

[5E01]
PID=0081
Schedule=1
Active=1
 
[5F01]
PID=0081
Schedule=1
Active=1

In Vplug.ini add the following somewhere in the [main] section

Code:

CAID_IgnoreList=1800,1802
ProviderID_IgnoreList=5401,5501

you may already have these items added - just edit to include the above values so that N1 (1800) & N3 (1802) are ignored and that the old N1 providerIds (5401, 5501 for exNTL areas) are also ignored.

Another great post nozzer

if there was a thanks button I would be hitting it

Tried the rep button but won't let me

gersrt · 30th June 2009, 17:18

Quote:

Originally Posted by despdan

Another great post nozzer

if there was a thanks button I would be hitting it

Tried the rep button but won't let me

Hey despdan,

Did you have any luck getting this to work.

despdan · 30th June 2009, 17:48

Quote:

Originally Posted by gersrt

Hey despdan,

Did you have any luck getting this to work.

Haven't tried it yet maybe later in the week.

gersrt · 30th June 2009, 18:17

im going to try it now myself, do you know where I should put the keys in v-plug.

Cheers

nozzer · 30th June 2009, 18:31

Use the built in editor in Vplugs console (click the icon in the taskbar when vplug is running and then use the "editor" tool) to enter them

gersrt · 30th June 2009, 22:16

Ok Guys,

Thanks for all the help.

Been reading up, and it seems you do not need to mod any files in vplug.

Just create a softcam.txt and import to vplug.

N 5F01 00 xxxxxxxxxx... ; IDEA key00
N 5F01 01 xxxxxxxxxx... ; IDEA key01 here
N 5F01 M1 xxxxxxxxxxxxxxxxxxxx…; for RSA
N 5F01 V 0101010101010101

Reading the hypercam keyfile it seems a bit confusing how to determine the above keys. I take it the rsa key is the really long one, and the others are the shorter keys.

Thanks

28th June 2009, 23:40	#1 (permalink)
gersrt Senior Member ++ Join Date: Feb 2007 Posts: 255 Thanks: 0 Thanked 1 Time in 1 Post	Ire N2 DVB-c Fix Hi As you may know there is now a dreambox n2 fix for Ireland. As it is open source and the keys are now public, is there any way of getting this fix to run on v-plug or the likes. Cheers Guys

29th June 2009, 12:38	#2 (permalink)
nozzer Moderator+ Join Date: Jan 2005 Location: Max pestering me for rechargable batteries for something or other ???? Posts: 6,047 Thanks: 5 Thanked 122 Times in 74 Posts	Re: Ire N2 DVB-c Fix afaik, if you put the keys into vplug and configure it properly then it will run just fine. Use VPlug 2.4.2 or later Enter the Op key as keyindex 00 for provider 5F01 Enter the modulus as keyindex M1 for provider 5F01 Also enter the modulus as keyindex M9 for provider 5F01 If you have the ECM verify key then you can also enter that as keyindex V for provider 5F01. You shouldn't need this though. In v_emm.ini add the following - Code: [5E01] PID=0081 Schedule=1 Active=1 [5F01] PID=0081 Schedule=1 Active=1 In Vplug.ini add the following somewhere in the [main] section Code: CAID_IgnoreList=1800,1802 ProviderID_IgnoreList=5401,5501 you may already have these items added - just edit to include the above values so that N1 (1800) & N3 (1802) are ignored and that the old N1 providerIds (5401, 5501 for exNTL areas) are also ignored.

29th June 2009, 13:08	#3 (permalink)
gersrt Senior Member ++ Join Date: Feb 2007 Posts: 255 Thanks: 0 Thanked 1 Time in 1 Post	Re: Ire N2 DVB-c Fix Cheers Mate. So I don't need the hypercam then???

30th June 2009, 18:17	#8 (permalink)
gersrt Senior Member ++ Join Date: Feb 2007 Posts: 255 Thanks: 0 Thanked 1 Time in 1 Post	Re: Ire N2 DVB-c Fix im going to try it now myself, do you know where I should put the keys in v-plug. Cheers

30th June 2009, 18:31	#9 (permalink)
nozzer Moderator+ Join Date: Jan 2005 Location: Max pestering me for rechargable batteries for something or other ???? Posts: 6,047 Thanks: 5 Thanked 122 Times in 74 Posts	Re: Ire N2 DVB-c Fix Use the built in editor in Vplugs console (click the icon in the taskbar when vplug is running and then use the "editor" tool) to enter them

30th June 2009, 22:16	#10 (permalink)
gersrt Senior Member ++ Join Date: Feb 2007 Posts: 255 Thanks: 0 Thanked 1 Time in 1 Post	Re: Ire N2 DVB-c Fix Ok Guys, Thanks for all the help. Been reading up, and it seems you do not need to mod any files in vplug. Just create a softcam.txt and import to vplug. N 5F01 00 xxxxxxxxxx... ; IDEA key00 N 5F01 01 xxxxxxxxxx... ; IDEA key01 here N 5F01 M1 xxxxxxxxxxxxxxxxxxxx…; for RSA N 5F01 V 0101010101010101 Reading the hypercam keyfile it seems a bit confusing how to determine the above keys. I take it the rsa key is the really long one, and the others are the shorter keys. Thanks Last edited by gersrt; 30th June 2009 at 22:27.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode