JonnyLuvRod

Hi all.

I've just aquired a Nokia DBox2 but it's stuck at 'loading kernel' display on the lcd screen.

I've tried flashing it with IFA with no joy.

I've done 3 boxes before, all Sagems, and they took images no trouble but this Nokia seems stubborn.

I've tried lots of different images but it won't budge.

Is it beyond saving or is there anything else I could try?

WITCHSMELLER PURSUIVANT

Post your IFA logs mate.

__________________
Pronounced 'leh-'nerd 'skin-'nerd.

JonnyLuvRod

Sorry, forgot to do that...



BootP: Got request from 001D0924C9F3
BootP: Got request from 00509C10C3E9
Error DeleteIpNetEntry: The parameter is incorrect.

Error CreateIpNetEntry: The parameter is incorrect.

BootP: Created ARP-entry with IP: 0.0.0.202 and Mac: 00509C10C3E9
BootP: Answer to 00509C10C3E9 sent
BootP: Got request from 001D0924C9F3
BootP: Got request from 001D0924C9F3
BootP: Got request from 001D0924C9F3
BootP: Got request from 001D0924C9F3
BootP: Got request from 001D0924C9F3

rodboy

Make sure your network is set up properly and set your link speed to 10Mbps/Half duplex.

I suggest you use the portable version of IFA and try flashing using crossover cable only.................here's the portable IFA

http://www.digitalworldz.co.uk/18552...table-ifa.html

__________________
[SIGPIC][/SIGPIC]

JonnyLuvRod

Cheers mate, I'm gonna fetch my old pc out the loft as it has the male com port on and runs windows xp. My laptop and other pc runs Vista and doesn't have suitable com ports.

I got a few methods to try yet but won't get chance today as I got the relatives round all day so gonna have a bash tomorrow cause I'm off work.

Thanks for the support lads, I'll post my progress as I go...

JonnyLuvRod

Hi guys.

I got IFA to work through my router, it wouldn't work through my pc, so I've now got an image.

Another problem is now after setting my location to scan, I get no transponders through fast scan.

I have a Sagem wich doesn't have any trouble scanning.

I've gone direct with no splitters on the feed but no joy.

Signal booster needed or anything else anyone could reccomend?

Thanks
__________________

Fergalsworld

back the image up from the sagem
read one partition and flash without boot loader it will put it into /tmp called mtd3.img
then if the sagem is a 1x convert the image using imagworks on your pc choose 2x and NO bootloader then flash it to the nokia it should just come straight on and there is no need to scan
if the sagem is 2x there is no need to convert it before you flash it.

__________________
Hope this helps.

rodboy

Fergals option is the easiest way to get a box up and running without all the FTP work required to transfer all sorts of files to various locations.

However, assuming you have all the roms/keys, EMUs etc in the right place with the attributes set to the correct values and services are all you require ...... just copy your services and bouquets from your working image to var/tuxbox/config/zapit then using remote press dbox > service > reload channel lists.

__________________
[SIGPIC][/SIGPIC]

JonnyLuvRod

I've backed up my working Sagem image and I know it's a 2X like the Nokia, gonna ftp it to my pc then flash it to the Nokia later tonight once my 3 year old nosey little boys gone to bed!

skywalker111

I got the same issue it picks up the box but wont flash