first flash that
DGSTATION is World best brand.
then get a program called putty and using your usb stick and putty do this
format usb stick in pc first
1. Boot your DGS image, wait to full boot. when picture comes on
2. Insert your USB stick
3. Telnet to your box, execute mount
4. In the list check - if the /dev/sda2 is mounted (if is FAT probably is mounted to /mnt/usb/usb0)
5. umount it - umount /mnt/usb/usb0
6. now execute fdisk /dev/sda (not sda2)
7. on the prompt press p - to see current partition table
8. press d - to delete partitions, if it is only one proceed, if not - press d again and delete all partitons
9. press p again - there will be no partitons now
10. Press n - to create new partition
11. select p - primary
12. select 1
13. press enter, enter
14. press w to write changes & exit
15. You have just created linux partition on your usb stick
16. Now format this partition - mkfs.ext3 /dev/sda2
17. mount formatted partition again - mount -t ext3 /dev/sda2 /mnt/usb/usb0
18. Now ftp e2 tar.gz to /mnt/usb/usb0
19. execute cd /mnt/usb/usb0
20. execute tar -zxvf e2image.tar.gz, wait few minutes to decompress all. (wait for prompt)
change the red writing bit to the name of the e2 image file you ftp to stick
21. after decompress type, sync
for reciever without hardrive in it
and ftped image file can be deleted of stick when done if you want