afaik, if you put the keys into vplug and configure it properly then it will run just fine.
Use VPlug 2.4.2 or later
Enter the Op key as keyindex 00 for provider 5F01
Enter the modulus as keyindex M1 for provider 5F01
Also enter the modulus as keyindex M9 for provider 5F01
If you have the ECM verify key then you can also enter that as keyindex V for provider 5F01. You shouldn't need this though.
In v_emm.ini add the following -
Code:
[5E01]
PID=0081
Schedule=1
Active=1
[5F01]
PID=0081
Schedule=1
Active=1
In Vplug.ini add the following somewhere in the [main] section
Code:
CAID_IgnoreList=1800,1802
ProviderID_IgnoreList=5401,5501
you may already have these items added - just edit to include the above values so that N1 (1800) & N3 (1802) are ignored and that the old N1 providerIds (5401, 5501 for exNTL areas) are also ignored.