both my disc drives ave disapeared n wen look at them in device mgr they ave warning tags on them ..any ideas ?? am at wits end aaarrrgggghhh...
am runnin xp pro by the way..![]()
both my disc drives ave disapeared n wen look at them in device mgr they ave warning tags on them ..any ideas ?? am at wits end aaarrrgggghhh...
am runnin xp pro by the way..![]()
you know it makes sense rodney !!






Have you installed any hardware ? What is the error ? Have you tried uninstalling the devices and re installing them ? Does the bios detect them ok ?
LOL too many questions not enough answers....![]()
If it can't be fixed with duck tape and a hammer then it's electrical
Digi's too scared to come up north!
I have a stalker and if your here well :-)
I would start off by uninstalling them in device manager and then re-boot.
There is only one way to avoid criticism: do nothing, say nothing and be nothing.
Check out their properties, thats why the warning symbols are there to tell you whats wrong.
This should be your first step!






NA......Shoot em all and let god decide.
Did you sort this out m8ty ?
If it can't be fixed with duck tape and a hammer then it's electrical
Digi's too scared to come up north!
I have a stalker and if your here well :-)
Try removing your IDE controller, restarting and letting windows detect it again.
there are 10 types of people in this world, those who understand binary......... and those who don't

Check the jumpers on the drives, make sure they not both set to Master if they are on the same IDE cable. If they are on the same cable and the jumpers are correct, try swapping them around. The master disk (or the disk on the end of the cable if they are using the cable select jumper) is the controller. If it's built in disk controller is faulty it will mess up both disks on that channel.
did you flash the drives
In loving memory of every cancer patient,
family member, and friend who has lost the battle with cancer, and the
ones who continue to conquer it!
Regards Allroad
![]()
.
Bookmarks